Our products

Our products


Piston engines
Aircraft turbomachines
Helicopter transmission systems
Helicopter engines
Turbines
Hydraulic systems
Greases
 

Piston engines

AERO 80, AERO 100, AERO 120: Mineral oils for piston engines for applications in which dispersant oils are not recommended. AERO 80 is used for running in piston engines.

AERO D 80, AERO D 100, AERO D 120: Monograde dispersant mineral oils for the piston engines of aircraft which operate in severe and very severe conditions.

AERO DM 15W50, AERO DM 20W60: Multigrade dispersant ashless oils for aircraft piston engines. For use all year round, in all climates. FAA-approved products.

Aircraft turbomachines

AEROTURBINE 222, AEROTURBINE 331, AEROTURBINE 921: Mineral oils for aircraft turbo machines, TURBOMECA-certified

Helicopter transmission systems

AEROGEAR 823, AEROGEAR 1032: Extreme pressure mineral oils for highly-charged helicopter gearboxes. EUROCOPTER-approved products.

Helicopter engines

AEROTURBINE 540: Synthetic oil for aircraft turbomachines. Qualified by TURBOMECA and EUROCOPTER.

Turbines

TURBONYCOIL 160: Synthetic oil for gas aircraft turbojets, as well as accessories and auxiliary power units (APU).

TURBONYCOIL 600: Synthetic oil for gas aircraft turbojets. Approved by major engine manufacturers (General Electric, Pratt and Whitney, Allison, Rolls-Royce, Allied Signal, Snecma).

Hydraulic systems

AEROHYDRAULIQUE 520: Mineral hydraulic fluid for systems operating under high pressure and at low to very low temperatures.

HYDRAUNYCOIL FH 51: Micro-filtered mineral hydraulic fluid for the hydraulic lines of aircraft and various items of terrestrial equipment. Also used as damping fluid for the landing gear of civil aircraft (Airbus, ATR, Bombardier, Fokker, Embraer, etc.)

HYDRAUNYCOIL FH 42: Low-temperature synthetic hydraulic fluid For use between -54°C and +200°C for long periods of time without any significant evaporation or change in viscosity. Also for use with autopilot systems, brakes and shock absorbers.

HYDRAUNYCOIL FH 2: Micro-filtered synthetic hydraulic fluid. For use between -40°C and +160°C, with peak operations possible at up to 210°C.

HYDRAUNYCOIL FH 5 AW: Mineral damping fluid for use with the landing gear of Boeing, McDonnell Douglas and Lockheed aircraft. Approved by Boeing in accordance with the BMS 3-32 Type II standard. Must not be used for storing landing gear.

HYDRAUNYCOIL FH 6 AW: Mineral damping fluid for use with the landing gear of Boeing, McDonnell Douglas and Lockheed aircraft. Approved by Boeing in accordance with the BMS 3-32 Type I standard. Used as a product for preserving landing gear after maintenance operations.

Greases

NYCOGREASE GN 10: General-purpose synthetic aviation grease. Recommended for equipment driven by low-power motors. Suitable for highly-charged bearings, gearboxes and surfaces actuated by low-power motors. Perfectly suited for components exposed to very low temperatures down to -73°C.

NYCOGREASE GN 17: Grease made with lithium soap and a synthetic diester oil thickened with a solid lubricant (contains 5% of molybdenum disulphide). For lubricating aeronautical equipment operating at temperatures from -73°C to +121°C.

NYCOGREASE GN 22: Multi-purpose synthetic NLGI 2 grease thickened with bentone. Suitable for the most severe conditions (high loads, high temperatures, water contamination), particularly for wheel bearings. For use at temperatures ranging from -65°C to +177°C.

NYCOGREASE GN 27: High load capacity synthetic grease containing molybdenum disulphide operating at temperatures ranging from -54°C to +177°C.

NYCOGREASE GN HC: Synthetic grease thickened with lithium soap; hydrocarbon, alcohol and water resistant. Designed to lubricate valve fittings, fuel circuits or methanol/water circuits. Also for use with valves which transport hot crude oil or natural gas in the oil industry.

NYCOGREASE GN GA 47: Anti-seize product containing graphite made of a mix of vaseline and micronised graphite. Use for threaded elements exposed to high temperatures.

For more technical information: Consult the product catalogue and safety data sheets.

 

RECOMMENDATION: Contact us for recommendations that are perfectly suited to your operating conditions.